DENSOFIX SF
Very fine spread coating for repairs of concrete surface
Product Characteristics
One-component dry spread coating containing re-dispersible polymers. Meets the requirements of class R3 according to EN 1504-3
- designed for concrete repair (principle 3, method 3.1 according to EN 1504-3)
- mixed with water only
- good workability
- perfect adhesion to base
- permanently water-resistant
- good mechanical properties
- cfrost-resistant
- compensated in volume
Use
DENSOFIX SF is one-component polymer-cement dry mortar mix intended especially for repairs of new monolithic reinforced concrete constructions. It can be also used for sealing of surface damage of concrete constructions or unification and sealing of repaired concrete and reinforced concrete constructions. Spread coating DENSOFIX SF can be coated with any type of secondary protection in dependence on exposure of the repaired structure.
Physical and mechanical parameters
Requirements / results according to EN 1504-3 class R3
| Testing method | R3 Requirements | Results | |
| Compressive strength (MPa) | EN 12190 | >25 | >25 |
| Chloride Ion Content | EN 1015-7 | <0.05% | <0.01% |
| Adhesive Bond (MPa) | EN 1542 | >1.5 | >1.5 |
| Carbonation Resistance | EN 13295 | dk ≤ control concrete | complies |
| Restrained shrinkage/expansion (MPa) | EN 12617-4 | Adhesion after test ≥1.5 | >1.5 |
Physical and mechanical parameters
| Colour | Non-standard light gray | |
| Bulks density (kg/m3) | 1480 ± 50 | |
| Bulk density of fresh spreaded coating (kg/m3) | 2050 ± 50 | |
| Tensile bending strength (MPa) | 7 days | >0 |
| 28 days | >5.5 | |
| Compressive strength (MPa) | 7 days | >16 |
| 28 days | >25 | |
| Dynamic E-module (GPa) | <25 | |
| Thermal expansion coefficient (K-1) | 12.5 ± 0.4×10-6 | |
| Frost resistance | >T150 | |
| Adhesion to base (MPa) | >1.5 | |
Test certificates
Meets the requirements of EN 1504-3, TP ŘSD Sec. 31 and TP SSBK III. Initial tests types according to EN 1504-3, Protocol No. 1301-CPD-0295 issued by TSÚS Bratislava. Supervision of the quality system, EMS and OHSAS is carried out by Notified Body No. 1020
Instruction for preparation and application.
During the processing of dry mortar mixes DENSOFIX SF it is generally necessary to comply with the principles contained in the relevant technological process BETOSAN for repair of reinforced concrete structures (TP No.1/06).
Base. Any incoherent, loose or weatherworn particles and dust shall be completely removed from the surface of the repaired base. The concrete surface cannot be contaminated by substances negatively affecting adhesion to the base (fats, greases, oils, etc.). Rinsing with pressure water is the best method for necessary complete removal of any dust from the entire repaired surface before application.
Preparation of spread coating. The spread coating is prepared by simple mixing with water. The recommended mixing ratio is as follows:
| Dry component (kg) | Water (litres) | Thickness of applied layer (mm) | ||
| DENSOFIX SF | 25 | 4.50 ÷ 5.00 | min. 1 | max. 3 |
Workability of the product is 50 – 60 minutes under 20 °C.
Neither temperature of base nor temperature of ambient air shall be below + 5 °C and above + 30 °C.
DENSOFIX SF spread coating is applied either mechanically or manually. Manual application means finning off. The spread coating is applied in one layer whose thickness should not exceed value specified in the above table. Surfaces coated with the spread coating shall be efficiently protected against direct sunshine and wind.
Surface finalization. After initial setting of the spread coating smoothing by a dry polyurethane or polystyrene
finisher is used for surfacing.
Surface treatment. Repaired surfaces must be properly treated immediately after completion to avoid especially direct exposure to sun, wind effect and other factors accelerating undesirable evaporation of the batch water. Use of the following treatment agents DENSOCURE W and DENSOCURE R proved well. It is desirable to properly moisten the repaired places several times a day for min. 7 days following the repair
Specific consumption
Specific consumption of dry mortar is 1.6 to 1.7 kg/m2 at 1 mm of layer thickness.
More info on the product page
DENSOFIX SF (ENG) (pdf, 0.3 MB)
DENSOFIX
Fine spreaded coating for repairs of concrete surface
Product Characteristics
One-component dry spreaded coating containing redispersable polymers. Meets the requirements of class R3 according to EN 1504-3.
- designed for concrete repair (principle 3, 4 and 7 method 3.1, 3.2, 3.3, 4.4, 7.1 and 7.2 according to EN 1504-3)
- mixed with water only
- good workability
- perfect adhesion to base
- permanently water-resistant and frost-resistant
- good mechanical properties
- compensated in volume
- as required by Act No. 258/2000 Coll. and Ministry of Health Decree No. 38/200 Coll. is eligible for direct contact with food
Use
DENSOFIX is one-component dry mortar mix intended especially for repairs and sealing of damaged and repaired concrete and reinforced concrete surfaces. Spreaded coating DENSOFIX can be coated with any type of secondary protection in dependence on exposure of the repaired structure.
Physical and mechanical parameters
Requirements / results according to EN 1504-3 class R3
| Testing method | R3 Requirements | Results | |
| Compressive strength (MPa) | EN 12190 | >25 | R3 |
| Chloride Ion Content | EN 1015-7 | <0.05% | <0.01% |
| Adhesive Bond (MPa) | EN 1542 | >1.5 | >1.5 |
| Carbonation Resistance | EN 13295 | dk ≤ control concrete | complies |
| Bound contraction-expansion (MPa) | EN 12617-4 | Adhesion after test >1.5 | >1.5 |
| Elastic Modulus (GPa) | EN 13415 | Adhesion after test >1.5 | >1.5 |
Physical and mechanical parameters
| Colour | Non-standard yellow | |
| Bulk density (kg/m3) | 1520 ± 40 | |
| Bulk density of fresh spreaded coating (kg/m3) | 2070 ± 40 | |
| Tensile bending strength (MPa) | 7 days | >3.0 |
| 28 days | >5.5 | |
| Compressive strength (MPa) | 7 days | >16 |
| 28 days | >25 | |
| Dynamic E-module (GPa) | <25 | |
| Thermal expansion coefficient (K-1) | 12.5 ± 0.4.10-6 | |
| Frost resistance | >T150 | |
| Adhesion to base (MPa) | >1.5 | |
Test certificates
Meets the requirements of EN 1504-3, TP ŘSD Sec. 31 and TP SSBK III.
Initial tests types according to EN 1504-3, Protocol No. 1301-CPD-0295 issued by TSÚS Bratislava. Supervision of the quality system, EMS and OHSAS is carried out by Notified Body No. 1020
The product has been approved as required by Act no. 258/2000 Coll. and Ministry of Health Decree No. 38/2000 Coll. as eligible for direct contact with food
Instruction for preparation and application.
During the processing of dry mortar mixes DENSOFIX it is generally necessary to comply with the principles contained in the relevant technological process BETOSAN for repair of reinforced concrete structures (TP No.1/06).
Base Any incoherent, loose or weatherworn particles and dust shall be completely removed from the surface of the repaired base. The concrete surface cannot be contaminated by substances negatively affecting adhesion to the base (fats, greases, oils, etc.). Rinsing with pressure water is the best method for necessary complete removal of any dust from the entire repaired surface before applica-tion.
Preparation of the spread. The spreaded coating is prepared by simple mixing with water. The recommended mixing ratio is as follows:
| Dry component (kg) | Water (litres) | Thickness of applied layer (mm) | ||
| DENSOFIX | 25 | 5.00 ÷ 5.75 | min. 2 | max. 4 |
Workability of the product is 50 – 60 minutes under 20 °C
Neither temperature of base nor temperature of ambient air shall be below + 5 °C and above + 30 °C.
DENSOFIX spreaded coating is applied either mechanically or manually. Manual application means finning off. The spreaded coating is applied in one layer whose thickness should not exceed value specified in the above table. Surfaces coated with the spreaded coating shall be efficiently protected against direct sunshine and wind.
Surface finalization. After initial setting of the spreaded coating smoothing by a dry polyurethane or polystyrene finisher is used for surfacing.
Surface treatment. Repaired surfaces shall be properly treated immediately after completion to avoid especially direct exposure to sun, wind effect and other factors accelerating undesirable evaporation
of the batch water. Use of the following treatment agents DENSOCURE W and DENSOCURE R proved well. It is desirable to properly moisten the repaired places several times a day for min. 7 days following the repair.
Specific consumption
Specific consumption of dry mortar is 1.6 to 1.7 kg/m2 at 1 mm of layer thickness.
More info on the product page
DENSOFIX (ENG) (pdf, 0.3 MB)
DENSOCRETE 555
Two-component fine spread for concrete surface sealing and finalization
Product Characteristics
Two-component composition consisting of dry inorganic based component and modified styreneacrylate dispersion. Meets the requirements of EN 1504-3
- designed for concrete repair (principle 3 and 3.1 according to EN 1504-3)
- supplied in specified rate of components, good workability
- excellent adhesion to concrete base
- permanently water-resistant
- applied manually or by spraying
- good mechanical properties
- frost-resistant
Use
DENSOCRETE 555 is a two-component polymer-cement mortar composition for surface repair of new monolithic reinforced concrete structures. Meets the requirements of class R3 according to EN 1504-3.
DENSOCRETE 555 mortar composition is suitable for sealing damaged surfaces of reinforced concrete structures and also for surface unification and sealing of concrete and reinforced concrete structures repaired with MONOCRETE repair mortars. DENSOCRETE 555 can be coated with any type of secondary protection in dependence on exposure of the repaired structure.
Physical and mechanical parameters
Requirements / results according to EN 1504-3 class R3
| Testing method | R3 Requirements | Results | |
| Compressive strength (MPa) | EN 12190 | >25 | >25 |
| Chloride Ion Content | EN 1015-7 | <0.05% | <0.01% |
| Adhesive Bond (MPa) | EN 1542 | >1.5 | >1.5 |
| Carbonation Resistance | EN 13295 | dk ≤ control concrete | complies |
| Bound contraction-expansion (MPa) | EN 12617-4 | Adhesion after test >1.5 | >1.5 |
Physical and mechanical parameters
| Colour | Non-standard grey | |
| Bulk density of dry component (kg/m3) | 1520 ± 40 | |
| Bulk density of fresh spread (kg/m3) | 1800 ± 40 | |
| Tensile bending strength (MPa) | 28 days | >8.5 |
| Compressive strength (MPa) | 28 days | >38 |
| Frost resistance | >T150 | |
| Adhesion to base (MPa) | >2.0 | |
Test certificates
Initial tests types according to EN 1504-3, Protocol No. 1301-CPD-0295 issued by TSÚS Bratislava. Supervision of the quality system, EMS and OHSAS is carried out by Notified Body No. 1020.
Instruction for preparation and application.
During the processing of dry mortar mixes DENSOCRETE 555 it is generally necessary to comply with the principles contained in the relevant technological process BETOSAN for repair of reinforced concrete structures (TP n.1/06).
Base Any incoherent, loose, weatherworn or otherwise visibly damaged concrete shall be completely removed from the repaired concrete surface before application. The concrete surface cannot be contaminated by substances negatively effecting adhesion to the base (fats, greases, oils, etc.). Tensile strength of concrete surface layers shall be 1.5 MPa at least. The base must be perfectly moistened before the application of spread. Extremely absorbent substrates can be cured with DENSOCURE 222 penetration agent.
Preparation of the spread DENSOCRETE 555 is prepared in a container of sufficient size by mixing both components well (preferably by electrically driven propeller agitator) in ratio: 25 kg of dry component, 4 litres of liquid component and 2 litres of water. A low-speed mixer with forced circulation is necessary for mixing. Consistency can be adjusted by adding up to 10% water, if needed.
| Dry component | Liquid component (litres) | Water (litres) | Thickness of applied layer (mm) | ||
| DENSOCRETE 555 | 25 | 4 | 2 | min. 1 | max. 3 |
Workability. Workability of the prepared spread is 60 minutes under 20 °C and relative humidity 50-70%. The prepared composition shall be suitably protected against desiccation.
Neither temperature of the base nor temperature of ambient air shall be below + 5 °C and above
+ 30 °C.
Spread application. It is necessary to thoroughly moisten the base (see above) before application of. DENSOCRETE 555 spread is applied mechanically or manually. Manual application means finning off, preferably with a notched trowel. Spread is applied one layer, whose thickness should be between 1 and 3 mm. Surfaces coated with the spread coating shall be efficiently protected against direct sunshine and wind.
Surface finalization is performed right after the spread application with steel finisher or a semi-hard bristle brush.
Surface treatment. Repaired surfaces shall be properly treated immediately after completion to avoid especially direct exposure to sun, wind effect and other factors accelerating undesirable evaporation of the batch water. It is necessary to properly moisten the repaired places several times a day at least first 3 days after the repair. Use of a DENSOCURE W treatment agent proved well.
Tools shall be cleaned with water right after completion. Hardened spread can be removed only mechanically.
Specific consumption
Specific consumption of the spread is: 1.8÷2.0 kg/m2 on 1 mm of layer thickness.
More info on the product page
DENSOCRETE 555 (ENG) (pdf, 0.3 MB)
DENSOCRETE 111
Anticorrosive protection /adhesive bridge
Product Characteristics
Two-component material consisting of dry inorganically based component and water-soluble modified
acrylate dispersion. Meets the requirements of EN 1504-7.
- supplied in specified ratio of components
- good workability, applied manually or by spraying
- perfect adhesion to concrete base and reinforcement
- permanently water-resistant
- provides active re-alkalization of reinforcement surrounding
Use
DENSOCRETE 111 is a two-component polymer cement mix intended for protection of reinforcement (principle No. 11, method 11.1 according to EN 1504-9) and creation of adhesive layers between the concrete base and repair materials, especially BETOSAN MONOCRETE PPE and PPE TH series, in cases of repairs of damaged concrete and reinforced concrete surfaces.
Physical and mechanical parameters
Requirements / results according to EN 1504-7
| Testing method | Requirements | Results | |
| Anticorrosive protection | EN 15183 | painted area without corrosion and swelling, corrosion of the plate edge <1mm | complies |
| Glass Transition Temperature | EU 12614 | NPD | |
| Skid resistance | EU 15184 | NPD | |
Physical and mechanical parameters
| Color | Non-standard grey |
| Bulk density of dry component (kg/m3) | 1620 ± 40 |
| Content of water-soluble chlorides(%) | <0.01 |
| Adhesion to base (MPa) | >25 |
Test certificates
Initial tests types according to EN 1504-3, Protocol No. 1301-CPD-0295 issued by TSÚS Bratislava.
Supervision of the quality system, EMS and OHSAS is carried out by Notified Body No. 1020.
Instruction for preparation and application.
Base
Any incoherent, loose, weatherworn or otherwise visibly damaged concrete shall be completely removed from the repaired concrete surface before application. The concrete surface cannot be contaminated by substances negatively effecting adhesion to the base (fats, greases, oils, etc.). Tensile strength of concrete surface layers shall be 1.5 MPa at least. Corroded reinforcement shall be carefully released and cleaned of any corrosive products (min. degree Sa1½ according to ČSN EN ISO 12944-4). The base must be perfectly moistened before the application of the adhesive bridge. If the base cannot be moistened, it is necessary to apply priming coat.
Preparation of adhesive bridge has two steps. The first step is the preparation of the priming solution, which shall be applied to reduce absorbability of the base in cases it can’t be properly moistened. Priming solution is prepared by mixing 0.5 liters of the liquid component with water in the ratio ranging between 1 : 5 and 1 : 8 in dependence on porosity and base quality (dense quality concrete requests higher dilution!). The adhesive bridge DENSOCRETE 111 itself is prepared in sufficiently voluminous vessel by proper mixing of 25kg of dry component and 7.5 kg (7.5 liters) of liquid component. Most suitable is to use an electrically driven propeller agitator. Consistency can be adjusted by adding up to 10% water, if needed.
In case of smaller size packaging the stated quantities are 10 x less.
Workability. Workability of the prepared adhesive bridge is 90 minutes under 20 °C and relative humidity 50-70 %. The prepared composition shall be efficiently protected against desiccation. Neither temperature of the base nor temperature of ambient air shall be below +5 °C and above +30 °C.
Adhesion bridge application. Before application of the adhesive bridge DENSOCRETE 111 it is necessary to thoroughly moisten the base (see above). If it is not practicable and base is excessively dry or absorbent, it is required for the surface to be coated with priming coat. The surface is primed by solution prepared by the above-mentioned process i.e. by diluting the liquid component with water in the ratio 1:5 up to 1:8 in dependence on porosity and the base quality. In cases of extraordinary absorbent and dry bases the priming can be repeated (two or three times) with technological break of at least 120 minutes between each coat layer. Priming coat shouldn’t create a glossy film on the concrete surface. Application of the adhesive bridge itself should be performed on a primed base with a technological break from 120 minutes to 24 hours after the priming. If DENSOCRETE 111 is used as corrosion protection of reinforcement, the second layer shall be applied with a technological break ranging from 1 hour to 6 hours after the first one but directly before application of a repair mortar so that the mortar is applied into the moistened bridge. The process is the same if it is used as an adhesive bridge. DENSOCRETE 111 is applied on the primed surface of the repaired construction so that thickness of the applied layer ranges approximately between 0.5 and 1.0 mm. The repair mortar or freshly laid concrete is applied, without delay, into the applied adhesive bridge. Open time. After application on the construction the so-called open time of the adhesive bridge is max. 30 minutes under 20°C and relative humidity 50 – 70 %. It is necessary to take into account that the possible application period of the mortar or new concrete is reduced with increasing temperature and reducing relative humidity.
Open time. After application on the construction the so-called open time of the adhesive bridge is max. 30 minutes under 20°C and relative humidity 50 – 70 %. It is necessary to take into account that the possible application period of the mortar or new concrete is reduced with increasing temperature and reducing relative humidity.
Specific consumption
Specific consumption of the adhesive bridge amounts to 0.6 ÷ 1.2 kg/m2 in dependence on surface roughness and absorbability.
More info on the product page
DENSOCRETE 111 (ENG) (pdf, 0.4 MB)
ARMOGUARD N
A migrating corrosion inhibitor – coating
Product characteristics
Single-component migrating inhibitor delaying corrosion of steel reinforcement in reinforced concrete.
- penetrates concrete, binds with iron, cleave on its surface and delays the initiation of corrosion
- has no influence on the concrete structure
- does not decrease vapor permeability
- significantly increases the lifetime of concrete
- easy application, supplied ready to use
- incombustible
Use
- ARMOGUARD N is used as a preventative guard against corrosion of concrete-steel constructions, during repairs of concrete–steel constructions for treatment of corroding or corrosion threatened steel armor in places without visual damage to concrete.
- ARMOGUARD N is especially suitable for lengthening the lifetime of appearing concrete.
Physical and mechanical parameters
| Color | Clear/colorless liquid |
| Density (kg/m3) | 1 010 |
| pH value | < 10,4 |
Test certificates
The product is certified according to Act no. 22/1997 Coll. and Governmental Decree No. 312/2005 Coll.
Supervision of the quality system, EMS and OHSAS is carried out by Notified Body No. 1020.
Instruction for preparation and application
Base. All dust, dirt and old coatings must be removed from surface of which ARMOGUARD N is supposed to be applied. The best way is to apply the coating on dry, absorbent surface.
Coating preparation. ARMOGUARD N is fit for direct application, does not require any further preparation.
Workability of the product is not limited
Neither temperature of the base nor temperature of ambient air shall be below + 5 °C and above + 30 °C.
ARMOGUARD N coating is applied by spraying or by a roller or a brush. According to the absorption
of the surface 1-2 layers are recommended, so the overall consumption is not lower than 0.2 kg/m2. Next layer can be applied directly after the previous one.
Surface treatment. Treated surfaces should be properly moistened once or twice a day for 1 – 3 days after the application to fasten the penetration
Specific consumption
Spreading capacity (specific consumption) amounts to 0.2 ÷ 0.4 kg/m2 in dependence to particular application.
More info on the product page
ARMOGUARD N (ENG) (pdf, 0.3 MB)
Betosan s.r.o. was founded in Czech Republic in 1992. A company grew out of an engineering bureau, which dealt with the reinforced concrete diagnostics and repairs consultancy.
Betosan s.r.o. specialises in manufacture of rehabilitation and waterproofing materials for reinforced concrete; offers ready-to-use mixtures for reinforced concrete sanation as well as various mortar admixtures for reinforced concrete, that allow in-situ measuring in dosage of filling compounds, necessary for a blend.
A wide product line includes dry concrete mixes, containing XYPEX® admixture.
ASFOTEX cold patch asphalt mix marketed in bags is affordable and enables permanent repair of potholes. Installation is simple and anyone can do it.
ASFOTEX is high quality cold patch asphalt mix, which enables quick patching of potholes in asphalt covering irrespective of weather conditions. Suitable for repairing concrete or asphalt covering of driveways, parking lots, pavements, roads and ramp, etc. Provides a good solution if two different coverings have to be joined, e.g. near street wells, or as a strip between the old asphalt covering and the installed concrete pavement stones, etc.
ASFOTEX is a durable filler mix for permanent installation – there is no need for the double installation of the traditional, temporary and weather-dependant milled asphalt or
emulsion-based cold asphalt and final hot-installed asphalt. Installation of Asfotex is simple and quick, no big expenses on labour or machinery are required.
After installation the road can immediately be opened for traffic. Post-settlement takes about one week. The mix may be used at temperatures below zero and remains flexible and coherent even at – 26 °C. It retains its adhesive quality also in wet conditions.
The cold-installed mix sold in 20 kg bags is easy to use in winter, when asphalt factories are closed, and in the summer season. As a rule one 20 kg bag is used to patch a hole, which area is 0.33 m2 and depth 5cm. If the hole is deeper, e.g. 15 cm, the mix is installed in 5 cm layers, which are tightened correspondingly.
1. Before repair. 2. Remove debris, ice or water from the hole to improve tacking. 3. Pour the mix into the cleaned hole straight from the bag. 4. Level out the surface with a spade or a rake, so that the level of the mix remains a little bit above the road surface. 5. Tighten the levelled mix with a plate-vibrator or by driving a car over it. 6. After repair.
Asfotex product sheet.pdf
Asfotex safety data sheet.pdf
Frequently Asked Questions
Which equipment is necessary for the installation of Asfotex?
No special equipment is required for the installation of Asfotex. You need a hard brush, a broom or a spade; a metal rake is recommended; ideally tightened surface is accomplished if you use a plate-vibrator.
May Asfotex be installed at temperatures below zero?
Asfotex is cold-installed asphalt mix based on solvent and diesel fuel and contains no water. Therefore, the mix may be used at temperatures below zero.
If you have bought a bag of Asfotex but do not use it at once or some bag just remains unused – how long can the material be stored?
In a closed bag for 2 years. If you have opened the bag, close it tightly with a tape, so that the solvent and diesel fuel cannot evaporate.
How to prepare the hole in asphalt for the installation of Asfotex?
First, clean the hole with a hard brush or a broom from loose debris to achieve better tacking with the surface. No prior impregnation is required.
May Asfotex be installed on a wet surface?
Yes, it may – this is the biggest advantage of the cold-installed asphalt mix.
How to clean tools?
All tools must be cleaned right after usage with a solvent-based cleanser.
When can you drive over the patched hole?
Traffic may be opened right away.
MARGUS VETEMA
GSM: +372 50 22 854
margus.vetema @langeproon.ee
Retail sales from well-appointed construction materials market.
Tallinn
Espak, Viadukti St. 42, Tel. +372 6512 333
K-Rauta Tondi, Tammsaare St. +372 49, Tel. 630 9709
K-Rauta Haabersti, Paldiski Rd 108a, Tel. +372 674 7900
Puumarket, Väike Männiku 11, Tel. +372 655 9232
Puumarket, Forelli 10, Tel. +372 656 3069
Decora, Laki 36, Tel. +372 733 1350
Tartu
Turu 24/Rebase 16, Tel. +372 747 1856
K-Rauta, Riia Rd.140E, Tel. +372 739 0800
Decora, Riia Rd 128, Tel. +372 733 1350
Pärnu
K-Rauta, Papiniidu 2A, Tel. +372 447 0850
Decora, Lai tn 18, Tel. +372 4471420
Rakvere
K-Rauta, Haljala St. 4, Tel. +372 326 4400
Puumarket, Rägavere tee 44, Tel. +372 3244366
Valga
K-Rauta, Tartu Rd. 84, Tel +372 766 4900
Võru
K-Rauta, Kreutzwaldi 89, Tel. +372 786 8900
Viljandi
Decora, Leola 53, Tel. +372 434 2040
Rapla
Espak, Tallinna Rd. 3b, Tel. +372 4894 590
Tapa
Stellana, Paide Rd.77, Tel. +372 5627 0804
Kuressaare
K-Rauta Tallinna Rd. 88, Auriga center, Tel. +372 630 9700
Besaplast PVC-joint sealants catalogue (pdf, 4.6 MB)
A German company called Besaplast Kunststoffe GmbH produces thermoplastic products. Product range is divided mostly into two major groups: waterproofing joint seals and products with special-purposed profiles.
Besaplast offers a wide product range in joint sealants for any kind of object that is in contact with high mechanical stress and demands a secure waterproofing solution – bridges, industrial buildings, water and sewage facilities, dams, tunnels etc.
Besaplast offers joint tapes in many different sizes and materials. Besaplast also offers full solutions according to client specific needs.
The other product group is custom made regular and coextruded profiles, elastic label holders for example. Besaplast PVC-joint sealants.