Loading...
Rotermann’s 6-8 „Jahuladu“
Jahuladu (Flour warehouse) is divided into the Old and the New Jahuladu. The new Jahuladu is a modern office building straight next to the square and connected to the historical Jahuladu. The office building is interweaved with modern architecture and historical atmosphere penetrating both buildings.
The old Jahuladu was ready in 2008. It was connected to a new building designed by an architect Hanno Grossschmidt, which has approximately 3000 square metres of sales and office areas and is situated next to a new city square.
Similar objects
Rotermanni 5 / Roseni 10
This is an office and residential building, situated in the heart of Tallinn in the historical Rotermann’s quarter, where in the year of 2007 a new shopping and residential complex was built. This is one of the city’s most attractive…
Foorum Centre
Business and residential centre Foorum, situated in Tallinn, at Narva maantee /Hobujaama corner, is meant for demanding client, offering more expensive and high-end goods and services in comparison to the neighbouring Viru center. Total area of the centre is 30…
Solaris Centre
Located in the heart of Talllinn shopping and entertainment centre Solaris opened in the year of 2009. Total area of this culture, conference and entertainment centre is 43 000 m². Solaris boasts a concert hall with 1800 seats, a Solaris…
Rävala 19 Apartment House
This building was the biggest ever apartment house built in Tallinn by Merko Ehitus. It was finished in 2005, the architects are Jüri Okas and Marika Lõoke. The total area is 15 902 m². The pit excavation with the following…
What we did
We fulfilled waterproofing and insulation works of „Jahuladu“ turned roof.
What we used
We primed the garret floor with Primer B2 and installed there the laminated membrane GRACE Bituthene 4000. It was overcoated with the laminated membrane GRACE Bituthene 8000. The laminated membrane edges were sealed with liquid membrane GRACE Bituthene Mastic. The areas around indenting were sealed with liquid membrane Bituthene LM. For the upturns protection we installed protection boards GRACE Servipak3mm and the horisontal substrates waterproofing was protected with heat insulation Styrofoam 500 2x50mm. Water drainage is engineered through the heated indenting system HL 62, collecting water from several planes.